数字量输入/输出模块 SIPLUS SM 1223 信号模块

发布日期：2017-12-26 16:57:29　　浏览量：

Overview

●为CPU的本机I/O提供更多的数字量输入/输出

●灵活地选择控制器以满足相应任务需要

●用于使用附加输入端和输出端对系统进行后续扩展

●+60 ℃ 到 +70 ℃，最多可同时控制输入的 50%

注意：

SIPLUS extreme 产品是基于西门子工业标准产品的。此处列出的内容来自相关的标准产品。添加了特定 SIPLUS extreme 信息

Area of application

数字量 I/O 模块允许：

●将控制器与过程中的数字信号连接

●将数字信号从控制器输出到过程

这为用户提供了下列优势：

●最佳适应性：

使用可以根据需要混合的信号模块，用户可以使其控制器准确地满足相关任务的要求。这可以避免产生不必要的投资。可以使用带有 8 个、16 个和 32 个输入/输出通道的模块。

●灵活性：

如果任务后续有所扩展，可以升级控制器。更新用户程序非常简单。

Functions

SM 1223 数字量输入/输出信号模块

●将过程中的外部数字信号电平转换为 S7-1200 的内部信号电平，

●还可将 SIMATIC S7-1200 的内部信号电平转换为过程所需的外部信号电平。

Technical Specifications

Order number	6AG1223-1BH32-2XB0	6AG1223-1BH32-4XB0	6AG1223-1PH32-2XB0	6AG1223-1PH32-4XB0
	SIPLUS S7-1200 SM 1223 8DI/8DQ	SIPLUS S7-1200 SM 1223 8DI/8DQ	SIPLUS S7-1200 SM 1223 8DI/8DQ RLY	SIPLUS S7-1200 SM 1223 8DI/8DQ RLY
Product type designation
Supply voltage
Rated ＆#118alue (DC)
● 24 V DC	Yes	Yes	Yes	Yes
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V
Input current
from backplane bus 5 V DC, max.	145 mA	145 mA	145 mA	145 mA
Digital inputs
● from load voltage L+ (without load), max.	4 mA	4 mA
Output voltage
Power supply to the transmitters
● present	Yes	Yes	Yes	Yes
Power loss
Power loss, typ.	2.5 W	2.5 W	5.5 W	5.5 W
Digital inputs
Number of digital inputs	8	8	8	8
● in groups of	2	2	2	2
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes	Yes	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max.	8	8	8	8
horizontal installation
— up to 40 °C, max.	8	8	8	8
— up to 50 °C, max.	8	8	8	8
vertical installation
— up to 40 °C, max.	8	8	8	8
Input voltage
● Rated ＆#118alue (DC)	24 V	24 V	24 V	24 V
● for signal "0"	5 V DC at 1 mA	5 V DC at 1 mA	5 V DC at 1 mA	5 V DC at 1 mA
● for signal "1"	15 VDC at 2.5 mA	15 VDC at 2.5 mA	15 VDC at 2.5 mA	15 VDC at 2.5 mA
Input current
● for signal "0", max. (permissible quiescent current)	1 mA	1 mA	1 mA	1 mA
● for signal "1", min.	2.5 mA	2.5 mA	2.5 mA	2.5 mA
● for signal "1", typ.	4 mA	4 mA	4 mA	4 mA
Input delay (for rated ＆#118alue of input voltage)
for standard inputs
— Parameterizable	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
for interrupt inputs
— Parameterizable	Yes	Yes	Yes	Yes
Cable length
● shielded, max.	500 m	500 m	500 m	500 m
● unshielded, max.	300 m	300 m	300 m	300 m
Digital outputs
Number of digital outputs	8	8	8	8
● in groups of	1	1	2	2
short-circuit protection	No; to be provided externally	No; to be provided externally	No; to be provided externally	No; to be provided externally
Switching capacity of the outputs
● with resistive load, max.	0.5 A	0.5 A	2 A	2 A
● on lamp load, max.	5 W	5 W	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC
Output voltage
● Rated ＆#118alue (DC)	24 V	24 V	5 V DC to 30 V DC	5 V DC to 30 V DC
● Rated ＆#118alue (AC)			5 V AC to 250 V AC	5 V AC to 250 V AC
● for signal "0", max.	0.1 V; with 10 kOhm load	0.1 V; with 10 kOhm load
Output current
● for signal "1" permissible range, max.	0.5 A	0.5 A	2 A	2 A
● for signal "0" residual current, max.	10 µA	10 µA
Output delay with resistive load
● "0" to "1", max.	50 µs	50 µs	10 ms	10 ms
● "1" to "0", max.	200 µs	200 µs	10 ms	10 ms
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max.	4 A; Current per mass	4 A; Current per mass	10 A; Current per mass	10 A; Current per mass
Relay outputs
● Number of relay outputs			8	8
● Rated supply voltage of relay coil L+ (DC)			24 V	24 V
● Number of operating cycles, max.			mechanically 10 million, at rated load voltage 100,000	mechanically 10 million, at rated load voltage 100,000
Switching capacity of contacts
— with inductive load, max.	0.5 A	0.5 A	2 A	2 A
— on lamp load, max.	5 W	5 W	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC
— with resistive load, max.	0.5 A	0.5 A	2 A	2 A
Cable length
● shielded, max.	500 m	500 m	500 m	500 m
● unshielded, max.	150 m	150 m	150 m	150 m
Interrupts/diagnostics/status information
Alarms
● Alarms	Yes	Yes	Yes	Yes
● Diagnostic alarm	Yes	Yes	Yes	Yes
Diagnostic messages
● Diagnostic functions	Yes	Yes	Yes	Yes
● Monitoring the supply voltage	Yes	Yes	Yes	Yes
Diagnostics indication LED
● for status of the inputs	Yes	Yes	Yes	Yes
● for status of the outputs	Yes	Yes	Yes	Yes
● for maintenance	Yes	Yes	Yes	Yes
● Status indicator digital output (green)	Yes	Yes	Yes	Yes
● Status indicator digital input (green)	Yes	Yes	Yes	Yes
Potential separation
Potential separation digital inputs
● between the channels, in groups of	2	2	2	2
Potential separation digital outputs
● between the channels			Relays	Relays
● between the channels, in groups of	1	1	2	2
● between the channels and the backplane bus	500 V AC	500 V AC	1500 V AC for 1 minute	1500 V AC for 1 minute
Permissible potential difference
between different circuits			750 V AC for 1 minute	750 V AC for 1 minute
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20	Yes	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
Ambient conditions
Free fall
● Fall height, max.	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package
Ambient temperature during operation
● min.	-40 °C; = Tmin; startup @ -25 °C	-20 °C; = Tmin; startup @ 0 °C	-40 °C; = Tmin; startup @ -25 °C	-20 °C; = Tmin; startup @ 0 °C
● max.	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4, inputs 4 (no adjacent points) for horizontal mounting position	60 °C; = Tmax	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4, inputs 4 (no adjacent points) for horizontal mounting position	60 °C; = Tmax
● permissible temperature change	5°C to 55°C, 3°C / minute
Ambient temperature during storage/transportation
● min.	-40 °C	-40 °C	-40 °C	-40 °C
● max.	70 °C	70 °C	70 °C	70 °C
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
● At cold restart, min.	-25 °C
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	Yes	Yes	Yes	Yes
Mechanics/material
Type of housing (front)
● plastic	Yes	Yes	Yes	Yes
Dimensions
Width	45 mm	45 mm	45 mm	45 mm
Height	100 mm	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm	75 mm
Weights
Weight, approx.	210 g	210 g	230 g	230 g

Order number	6AG1223-1PL32-2XB0	6AG1223-1PL32-4XB0	6AG1223-1BL32-2XB0	6AG1223-1BL32-4XB0
	SIPLUS S7-1200 SM 1223 16DI/16DQ RLY	SIPLUS S7-1200 SM 1223 16DI/16DQ RLY	SIPLUS S7-1200 SM 1223 16DI/16DQ	SIPLUS S7-1200 SM 1223 16DI/16DQ
Product type designation
Supply voltage
Rated ＆#118alue (DC)
● 24 V DC	Yes	Yes	Yes	Yes
permissible range, lower limit (DC)			20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V
Input current
from backplane bus 5 V DC, max.	180 mA	180 mA	185 mA	185 mA
Digital inputs
● from load voltage L+ (without load), max.			4 mA	4 mA
Output voltage
Power supply to the transmitters
● present	Yes	Yes	Yes	Yes
Power loss
Power loss, typ.	10 W	10 W	4.5 W	4.5 W
Digital inputs
Number of digital inputs	16	16	16	16
● in groups of	2	2	2	2
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes	Yes	Yes
Number of simultaneously controllable inputs
all mounting positions
— up to 40 °C, max.	16	16	16	16
horizontal installation
— up to 40 °C, max.	16	16	16	16
— up to 50 °C, max.	16	16	16	16
vertical installation
— up to 40 °C, max.	16	16	16	16
Input voltage
● Type of input voltage			DC	DC
● Rated ＆#118alue (DC)	24 V	24 V	24 V	24 V
● for signal "0"	5 V DC at 1 mA	5 V DC at 1 mA	5 V DC at 1 mA	5 V DC at 1 mA
● for signal "1"	15 VDC at 2.5 mA	15 VDC at 2.5 mA	15 VDC at 2.5 mA	15 VDC at 2.5 mA
Input current
● for signal "0", max. (permissible quiescent current)	1 mA	1 mA	1 mA	1 mA
● for signal "1", min.	2.5 mA	2.5 mA	2.5 mA	2.5 mA
● for signal "1", typ.	4 mA	4 mA	4 mA	4 mA
Input delay (for rated ＆#118alue of input voltage)
for standard inputs
— Parameterizable	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four	Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four
for interrupt inputs
— Parameterizable	Yes	Yes	Yes	Yes
Cable length
● shielded, max.	500 m	500 m	500 m	500 m
● unshielded, max.	300 m	300 m	300 m	300 m
Digital outputs
Number of digital outputs	16	16	16	16
● in groups of	4	4	1	1
short-circuit protection	No; to be provided externally	No; to be provided externally	No; to be provided externally	No; to be provided externally
Switching capacity of the outputs
● with resistive load, max.	2 A	2 A	0.5 A	0.5 A
● on lamp load, max.	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	5 W	5 W
Output voltage
● Rated ＆#118alue (DC)	5 V DC to 30 V DC	5 V DC to 30 V DC	24 V	24 V
● Rated ＆#118alue (AC)	5 V AC to 250 V AC	5 V AC to 250 V AC
● for signal "0", max.			0.1 V; with 10 kOhm load	0.1 V; with 10 kOhm load
Output current
● for signal "1" permissible range, max.	2 A	2 A	0.5 A	0.5 A
● for signal "0" residual current, max.			10 µA	10 µA
Output delay with resistive load
● "0" to "1", max.	10 ms	10 ms	50 µs	50 µs
● "1" to "0", max.	10 ms	10 ms	200 µs	200 µs
Total current of the outputs (per group)
horizontal installation
— up to 50 °C, max.	8 A; Current per mass	8 A; Current per mass	8 A; Current per mass	8 A; Current per mass
Relay outputs
● Number of relay outputs	16	16
● Rated supply voltage of relay coil L+ (DC)	24 V	24 V
● Number of operating cycles, max.	mechanically 10 million, at rated load voltage 100,000	mechanically 10 million, at rated load voltage 100,000
Switching capacity of contacts
— with inductive load, max.	2 A	2 A	0.5 A	0.5 A
— on lamp load, max.	30 W with DC, 200 W with AC	30 W with DC, 200 W with AC	5 W	5 W
— with resistive load, max.	2 A	2 A	0.5 A	0.5 A
Cable length
● shielded, max.	500 m	500 m	500 m	500 m
● unshielded, max.	150 m	150 m	150 m	150 m
Interrupts/diagnostics/status information
Alarms
● Alarms	Yes	Yes	Yes	Yes
● Diagnostic alarm	Yes	Yes	Yes	Yes
Diagnostic messages
● Diagnostic functions	Yes	Yes	Yes	Yes
● Monitoring the supply voltage	Yes	Yes
Diagnostics indication LED
● for status of the inputs	Yes	Yes	Yes	Yes
● for status of the outputs	Yes	Yes	Yes	Yes
● for maintenance	Yes	Yes	Yes	Yes
● Status indicator digital output (green)	Yes	Yes	Yes	Yes
● Status indicator digital input (green)	Yes	Yes	Yes	Yes
Potential separation
Potential separation digital inputs
● between the channels, in groups of	2	2	2	2
Potential separation digital outputs
● between the channels	Relays	Relays
● between the channels, in groups of	4	4	1	1
● between the channels and the backplane bus	1500 V AC for 1 minute	1500 V AC for 1 minute	500 V AC	500 V AC
Permissible potential difference
between different circuits	750 V AC for 1 minute	750 V AC for 1 minute
Degree and class of protection
Degree of protection acc. to EN 60529
● IP20	Yes	Yes	Yes	Yes
Standards, approvals, certificates
CE mark	Yes	Yes	Yes	Yes
Ambient conditions
Free fall
● Fall height, max.	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package	0.3 m; five times, in dispatch package
Ambient temperature during operation
● min.	-40 °C; = Tmin; startup @ -25 °C	-20 °C; = Tmin; startup @ 0 °C	-40 °C; = Tmin; startup @ -25 °C	-20 °C; = Tmin; startup @ 0 °C
● max.	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8, inputs 8 (no adjacent points) for horizontal mounting position	60 °C; = Tmax	70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8, inputs 8 (no adjacent points) for horizontal mounting position	60 °C; = Tmax
Ambient temperature during storage/transportation
● min.	-40 °C	-40 °C	-40 °C	-40 °C
● max.	70 °C	70 °C	70 °C	70 °C
Extended ambient conditions
● relative to ambient temperature-atmospheric pressure-installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)	100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector	Yes	Yes	Yes	Yes
Mechanics/material
Type of housing (front)
● plastic	Yes	Yes	Yes	Yes
Dimensions
Width	70 mm	70 mm	70 mm	70 mm
Height	100 mm	100 mm	100 mm	100 mm
Depth	75 mm	75 mm	75 mm	75 mm
Weights
Weight, approx.	350 g	350 g	310 g	310 g

数字量输入/输出模块 SIPLUS SM 1223 信号模块

上一篇：SIPLUS SB 1223 信号板

下一篇：数字量输出模块 SIPLUS SM 1222 信号模块

产品和服务

公司信息

联系我们