联系我们
可编程控制器S7-1200
联系方式
江苏震旦电气科技有限公司
地址：江苏省常州市天宁区龙城大道150号1号楼
总机：0519-86679200 86679300 86679500 86679600 86679700
E-mail：cherry@zhendanele.com

数字量输出模块 SIPLUS SM 1222 信号模块

发布日期：2017-12-26 17:05:46　　浏览量：

1.jpg

Overview

●为 CPU 的集成 I/O 提供更多的数字量输出

●灵活地选择控制器以满足相应任务需要

●用于使用附加输出对系统进行后续扩展

●+60 ℃ 到 +70 ℃，最多可同时控制输入的 50%

注意：

SIPLUS extreme 产品是基于西门子工业标准产品的。此处列出的内容来自相关的标准产品。添加了特定 SIPLUS extreme 信息

icon_up_arrow.png

Area of application

数字量输出模块允许将数字信号从控制器输出到过程。

这为用户提供了下列优势：

●最佳适应性：

使用可以根据需要混合的信号模块，用户可以使其控制器准确地满足相关任务的要求。这可以避免产生不必要的投资。可以使用带有 8 个、16 个和 32 个输入/输出通道的模块。

●灵活性：

如果任务后续有所扩展，可以升级控制器。更新用户程序非常简单。

icon_up_arrow.png

Functions

SM 1222 数字量输出信号模块将 SIMATIC S7-1200 的内部信号电平转换为过程所需的外部信号电平。

icon_up_arrow.png

Technical Specifications

Order number6AG1222-1BF32-2XB06AG1222-1BF32-4XB06AG1222-1BH32-2XB06AG1222-1BH32-4XB0

SIPLUS S7-1200 SM 1222 8DQSIPLUS S7-1200 SM 1222 8DQSIPLUS S7-1200 SM 1222 16DQSIPLUS S7-1200 SM 1222 16DQ
Product type designation



Input current



from backplane bus 5 V DC, max.120 mA120 mA140 mA140 mA
Power loss



Power loss, typ.1.5 W1.5 W2.5 W2.5 W
Digital outputs



Number of digital outputs881616

  • ● in groups of

1111
short-circuit protectionNo; to be provided externallyNo; to be provided externallyNo; to be provided externallyNo; to be provided externally
Switching capacity of the outputs



  • ● with resistive load, max.

0.5 A0.5 A0.5 A0.5 A

  • ● on lamp load, max.

5 W5 W5 W5 W
Output voltage



  • ● Rated ＆#118alue (DC)

24 V24 V24 V24 V

  • ● for signal "0", max.

0.1 V; with 10 kOhm load0.1 V; with 10 kOhm load0.1 V; with 10 kOhm load0.1 V; with 10 kOhm load
Output current



  • ● for signal "1" rated ＆#118alue

0.5 A0.5 A0.5 A0.5 A

  • ● for signal "0" residual current, max.

10 µA10 µA10 µA10 µA
Output delay with resistive load



  • ● "0" to "1", max.

50 µs50 µs50 µs50 µs

  • ● "1" to "0", max.

200 µs200 µs200 µs200 µs
Total current of the outputs (per group)



horizontal installation



  • — up to 50 °C, max.

4 A; Current per mass4 A; Current per mass8 A; Current per mass8 A; Current per mass
Relay outputs



Switching capacity of contacts



  • — with inductive load, max.

0.5 A0.5 A0.5 A0.5 A

  • — on lamp load, max.

5 W5 W5 W5 W

  • — with resistive load, max.

0.5 A0.5 A0.5 A0.5 A
Cable length



  • ● shielded, max.

500 m500 m500 m500 m

  • ● unshielded, max.

150 m150 m150 m150 m
Interrupts/diagnostics/status information



Alarms



  • ● Alarms

YesYesYesYes

  • ● Diagnostic alarm

YesYesYesYes
Diagnostic messages



  • ● Diagnostic functions

YesYesYesYes

  • ● Monitoring the supply voltage

YesYesYesYes
Diagnostics indication LED



  • ● for status of the outputs

YesYesYesYes

  • ● for maintenance

YesYesYesYes

  • ● Status indicator digital output (green)

YesYesYesYes
Potential separation digital outputs



  • ● between the channels, in groups of

1111

  • ● between the channels and the backplane bus

500 V AC500 V AC500 V AC500 V AC
Degree and class of protection



Degree of protection acc. to EN 60529



  • ● IP20

YesYesYesYes
Standards, approvals, certificates



CE markYesYesYesYes
Ambient conditions



Free fall



  • ● Fall height, max.

0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package
Ambient temperature during operation



  • ● min.

-40 °C; = Tmin; startup @ -25 °C-20 °C; = Tmin; startup @ 0 °C-40 °C; = Tmin; startup @ -25 °C-20 °C; = Tmin; startup @ 0 °C

  • ● max.

70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4 (no adjacent points) for horizontal mounting position60 °C; = Tmax70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8 (no adjacent points) for horizontal mounting position60 °C; = Tmax
Ambient temperature during storage/transportation



  • ● min.

-40 °C-40 °C-40 °C-40 °C

  • ● max.

70 °C70 °C70 °C70 °C
Extended ambient conditions



  • ● relative to ambient temperature-atmospheric pressure-installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity



  • — With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance



  • — against biologically active substances / conformity with EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

  • — against chemically active substances / conformity with EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • — against mechanically active substances / conformity with EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method



required front connectorYesYesYesYes
Mechanics/material



Type of housing (front)



  • ● plastic

YesYesYesYes
Dimensions



Width45 mm45 mm45 mm45 mm
Height100 mm100 mm100 mm100 mm
Depth75 mm75 mm75 mm75 mm
Weights



Weight, approx.180 g180 g220 g220 g


Order number6AG1222-1HF32-2XB06AG1222-1HF32-4XB06AG1222-1HH32-2XB06AG1222-1HH32-4XB0

SIPLUS S7-1200 SM 1222 8DQ RLYSIPLUS S7-1200 SM 1222 8DQ RLYSIPLUS S7-1200 SM 1222 16DQ RLYSIPLUS S7-1200 SM 1222 16DQ RLY
Product type designation



Supply voltage



permissible range, lower limit (DC)
20.4 V
20.4 V
permissible range, upper limit (DC)
28.8 V
28.8 V
Input current



from backplane bus 5 V DC, max.120 mA120 mA135 mA135 mA
Power loss



Power loss, typ.4.5 W4.5 W8.5 W8.5 W
Digital inputs



Number of digital inputs
0
0
Digital outputs



Number of digital outputs881616

  • ● in groups of

2211
short-circuit protectionNo; to be provided externallyNo; to be provided externallyNo; to be provided externallyNo; to be provided externally
Switching capacity of the outputs



  • ● with resistive load, max.

2 A2 A2 A2 A

  • ● on lamp load, max.

30 W with DC, 200 W with AC30 W with DC, 200 W with AC30 W with DC, 200 W with AC30 W with DC, 200 W with AC
Output voltage



  • ● Rated ＆#118alue (DC)

5 V DC to 30 V DC5 V DC to 30 V DC5 V DC to 30 V DC5 V DC to 30 V DC

  • ● Rated ＆#118alue (AC)

5 V AC to 250 V AC5 V AC to 250 V AC5 V AC to 250 V AC5 V AC to 250 V AC
Output current



  • ● for signal "1" permissible range, max.

2 A2 A2 A2 A
Output delay with resistive load



  • ● "0" to "1", max.

10 ms10 ms10 ms10 ms

  • ● "1" to "0", max.

10 ms10 ms10 ms10 ms
Total current of the outputs (per group)



horizontal installation



  • — up to 50 °C, max.

10 A; Current per mass10 A; Current per mass10 A; Current per mass10 A; Current per mass
Relay outputs



  • ● Number of relay outputs

881616

  • ● Rated supply voltage of relay coil L+ (DC)

24 V24 V24 V24 V

  • ● Number of operating cycles, max.

mechanically 10 million, at rated load voltage 100,000mechanically 10 million, at rated load voltage 100,000mechanically 10 million, at rated load voltage 100,000mechanically 10 million, at rated load voltage 100,000
Switching capacity of contacts



  • — with inductive load, max.

2 A2 A2 A2 A

  • — on lamp load, max.

30 W with DC, 200 W with AC30 W with DC, 200 W with AC30 W with DC, 200 W with AC30 W with DC, 200 W with AC

  • — with resistive load, max.

2 A2 A2 A2 A
Cable length



  • ● shielded, max.

500 m500 m500 m500 m

  • ● unshielded, max.

150 m150 m150 m150 m
Interrupts/diagnostics/status information



Alarms



  • ● Alarms

YesYesYesYes

  • ● Diagnostic alarm

YesYesYesYes
Diagnostic messages



  • ● Diagnostic functions

YesYesYesYes

  • ● Monitoring the supply voltage

YesYesYesYes
Diagnostics indication LED



  • ● for status of the outputs

YesYesYesYes

  • ● for maintenance

YesYesYesYes

  • ● Status indicator digital output (green)

YesYesYesYes
Potential separation digital outputs



  • ● between the channels

Relay, dry contactRelay, dry contactRelaysRelay, dry contact

  • ● between the channels, in groups of

2244

  • ● between the channels and the backplane bus

1500 V AC for 1 minute1500 V AC for 1 minute1500 V AC for 1 minute1500 V AC for 1 minute
Permissible potential difference



between different circuits750 V AC for 1 minute750 V AC for 1 minute750 V AC for 1 minute750 V AC for 1 minute
Degree and class of protection



Degree of protection acc. to EN 60529



  • ● IP20

YesYesYesYes
Standards, approvals, certificates



CE markYesYesYesYes
Ambient conditions



Free fall



  • ● Fall height, max.

0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package0.3 m; five times, in dispatch package
Ambient temperature during operation



  • ● min.

-40 °C; = Tmin; startup @ -25 °C-20 °C; = Tmin; startup @ 0 °C-40 °C; = Tmin; startup @ -25 °C-20 °C; = Tmin; startup @ 0 °C

  • ● max.

70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 4 (no adjacent points) for horizontal mounting position60 °C; = Tmax70 °C; = Tmax; Tmax > +60 °C number of simultaneously activated outputs 8 (no adjacent points) for horizontal mounting position60 °C; = Tmax

  • ● permissible temperature change

5°C to 55°C, 3°C / minute


Ambient temperature during storage/transportation



  • ● min.

-40 °C-40 °C-40 °C-40 °C

  • ● max.

70 °C70 °C70 °C70 °C
Extended ambient conditions



  • ● relative to ambient temperature-atmospheric pressure-installation altitude

Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)

  • ● At cold restart, min.

-25 °C


Relative humidity



  • — With condensation, tested in accordance with IEC 60068-2-38, max.

100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance



  • — against biologically active substances / conformity with EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!

  • — against chemically active substances / conformity with EN 60721-3-3

Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!

  • — against mechanically active substances / conformity with EN 60721-3-3

Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method



required front connectorYesYesYesYes
Mechanics/material



Type of housing (front)



  • ● plastic

YesYesYesYes
Dimensions



Width45 mm45 mm45 mm45 mm
Height100 mm100 mm100 mm100 mm
Depth75 mm75 mm75 mm75 mm
Weights



Weight, approx.190 g190 g260 g260 g


产品和服务

公司信息

    联系我们

  • 联系方式
  • 总机：0519-86679200 86679300 86679500 86679600 86679700
  • 传真：0519-89991206
  • 地址：江苏省常州市天宁区龙城大道150号1号楼
  • 邮编：213021
  • E-mail：cherry@zhendanele.com
  • 官方微信公众平台

Copyright©江苏震旦电气科技有限公司 All Rights Reserved. 苏ICP备06023532号